The British BSP connections include two types of threads, BSPP which are straight (or parallel) and BSPT which are tapered. The BSPT tapered male will mate with a BSPT tapered female (usually a port) and seals on the threads. The BSPP parallel male has a 30° chamfered seat which seals with a BSPP swivel female on its 30° cone seat. (Similar to the American NPSM-NPTF connection, however the BSPP swivel female end is commonly found on couplings.)

The BSP threads are similar to, but not interchangeable with American NPTF pipe threads. The thread pitch is different in most sizes, and the thread angle is 55° instead of 60° angle found on NPTF and NPSM threads.

Click here for a guide on how to properly measure threads.

British Standard Pipe - BSP (BSPP Parallel & BSPT Tapered)
Dash Size	Inch Size	Thread	Male Thread O.D. mm	Male Thread O.D. inches	Female Thread I.D. mm	Female Thread I.D. inches
2	1/8	1/8 - 28	10.3	.41	9.4	.37
4	1/4	1/4 - 19	13.7	.54	12.4	.49
6	3/8	3/8 - 19	17.3	.68	15.7	.62
8	1/2	1/2 - 14	21.3	.84	19.3	.76
10	5/8	5/8 - 14	22.9	.90	21.1	.83
12	3/4	3/4 - 14	26.9	1.06	24.9	.98
16	1	1 - 11	33.3	1.31	31.5	1.24
20	1-1/4	1-1/4 - 11	42.2	1.66	40.1	1.58
24	1-1/2	1-1/2 - 11	48.3	1.90	46.2	1.82
32	2	2 - 11	60.4	2.38	57.9	2.29

نظرات شما عزیزان:

نام :

آدرس ایمیل:

وب سایت/بلاگ :

متن پیام:

نظر خصوصی

 کد را وارد نمایید:

 

 

 

عکس شما

آپلود عکس دلخواه: